Simple ESP32 Ethernet Example with ESP32 Gateway
Using ethernet with ESP32 is very easy, thanks to the built-in RMII PHY. In this article, a simple ESP32 ethernet example is outlined.
Using ethernet with ESP32 is very easy, thanks to the built-in RMII PHY. In this article, a simple ESP32 ethernet example is outlined.
Notes on the ESP32-C3 GPIO usage – strapping pins, RTC domain pins, flash pins and tips on how to get maximum GPIOs for your design.
Using Winbond W25N01 with ESP32 and STM32 can be tricky given how much it differs from regular NOR flash like W25Qxx.
Detailed notes on which ESP32 ethernet PHY options are supported by the most recent ESP32 Arduino releases and ESP-IDF.
This article lists and compares the cost and performance of various common and low cost methane sensor solutions available in the market.
A short note and example schematic for using LED flash with OV2640, OV5640, and any other OmniVision camera sensor module.
Using multiple SIM cards with SIMCom or Quectel modems is easy using multiplexers and a basic logic controller. Modems must support hot swap.
Notes on how to connect ESP32 with quad SPI PSRAM memory. Example ESP32 PSRAM schematic using ESP-WROOM-32 and ESP-PSRAM64.
Synchronous rectifier design for isolated high power PoE+ (802.3 at and bt) applications can help increase efficiency and reduce heat.
MCUs like STM32 and i.MX RT1050 series have a 24-bit parallel RGB interface for displays. RGB to MIPI DSI converters allow DSI displays.